RY Thermal Oil Pump for a Petrochemical Plant in the Middle East
An RY series thermal oil pump was selected for heat-transfer duty at 280°C. The reported operating point was 85 m³/h for continuous 24/7 service.
Project Approach
This project is documented from the reported operating data below. For a comparable duty the required flow, purity or head, pressure, temperature, medium properties and operating schedule are confirmed first, then the equipment family and configuration are selected against those values.
Reported Scope and Duty
Reported for this installation: application — Petrochemical heat transfer, fluid — Heat-transfer oil, temperature — 280°C, flow — 85 m³/h. These are the figures reported for this project and are not a guarantee for other sites.
Equipment Configuration Reference
Published specifications for the equipment applied in this class of project:
How a Similar Project Is Specified
Send the application and the required capacity first. The configuration is then fixed against the duty point, the operating environment (indoor or outdoor, ambient temperature, power supply) and the applicable site or regional requirements. Where a purity, pressure or flow is not yet fixed, the achievable range is confirmed before equipment is proposed.
Frequently Asked Questions
What temperature range does the RY series thermal oil pump cover?
The published RY range is -20°C to 350°C for liquid-phase heat transfer oil. Selection is based on the maximum working temperature of your system.
Does the RY pump need cooling water?
No. The bearing and seal housing are cooled by natural air-cooling fins, so no external cooling-water system is required.
Request a Similar Solution
Send your application conditions and required capacity. Qingdao Green Power can review the duty and recommend a suitable configuration.
Review the relevant product specifications and selection guidance.
View Product → Request Equipment Selection →